Align M690L Multicopter Second Flight with PID adjustments to Tilt and Roll

Well after our first flight we were wanting to improve what we could capture so we adjusted the PID's via the Align Gimbal software. These values are still in progress but are getting better. Take a look and see for yourself. Main adjustment were in Tilt, and Roll to the P and the D values. Once we have numbers that seem to work in many conditions we will share these value so you can try them with your G3.



We look forward to making even better images. Also want to note that we used the red dampeners on this flight. Which helped reduced vibrations in the images we captured.



In case you missed our first video http://youtu.be/b97xe32EU-g. The difference are the PID's and dampeners. Which seemed to help a lot.



Thanks for watching!



Jeff Fassbinder



For more information on Align products please visit www.align.com.tw or www.alignrcusa.com.

Align M690L First Flight with G3-GH Gimbal and G3

Here is the first flight on the Align M690L Multicopter. Myself and Tim had just got this unit from Assurance RC for flight testing and videos. Myself and Tim went out to test fly the M690L Multicopter to get used to flying with the extra accessories as well as to make sure that all functions were working properly with the one man on 10 channels. Also covered in this video is the calibration of the APS-M for use of GPS operation. This is important for the home function to work properly and also so some of the other intelligent flight features work.



Well we hope to do many more videos and explore the capabilities of the G3-GH gimbal. Our setup is stock and again this is our first attempt with the added camera and gimbal. With more flights we will be better able to tune and share with you.



Well thanks for watching!



Jeff Fassbinder



For more product information please look at www.align.com.tw or www.alignrcusa.com